Configuring Cisco Device In Linux With Minicom
To configure Cisco device in Linux machine with Minicom: install Minicom utility, connect via COM-to-USB cable & physical connection, determine port using `sudo dmesg | grep -i tty`, launch Minicom with `sudo minicom -s` and set serial port settings.
How to configure Cisco device in Linux machine with Minicom? You need installed Minicom utility, C-13 power cable, physical connection from your PC to Cisco device via COM-to-USB cable like this:
Minicom utility need for connecting and sending commands to devices, connected by serial port, based on RS-232 standard and have out-of-box drivers. As an alternative in Windows may be used PuTTY.
If you not have already installed Minicom, this command help you:
sudo apt install minicom -y
Ok, after device is connected determine port in Debian-based systems:
sudo dmesg | g...